Cube Issues Urgent Recall for Agree Road Bikes Due to Fork Defect

Cube Bicycles has initiated an urgent recall for all its Agree model road bikes following the discovery of a critical manufacturing flaw in the fork resin. This defect has resulted in the appearance of cracks in the carbon fiber, presenting a substantial safety hazard for cyclists. Owners of these affected models, which were sold prior to November 30, 2025, are strongly advised to discontinue their use immediately. A thorough inspection and replacement of the faulty fork by an authorized Cube dealer are imperative to avert potential catastrophic failures.

The recall primarily targets several models within the Cube Agree C:62 series, encompassing those sold in both 2025 and 2026. The identified issue stems from an insufficient resin content in certain areas of the forks, particularly above the brake mount. This deficiency makes the outer carbon layers susceptible to delamination under the stress of heavy braking, significantly weakening the fork and increasing the risk of complete failure in the left fork blade. This could lead to serious accidents and injuries if not addressed promptly.

To determine if a bicycle is affected, owners must locate both the frame number and the serial number on the fork's steerer tube. The latter requires the removal of the headset, a procedure Cube recommends be performed by a qualified mechanic. The final inspection and subsequent replacement, if necessary, must be carried out by an authorized Cube dealership to ensure compliance with safety standards and proper installation.

The affected models include a comprehensive list from the 2025 and 2026 Agree C:62 lineup, such as the C:62 One Foggrey'n' grey, Pro blackline, Pro polarlight 'n' aquagreen, Race flashlime 'n' black, SLX liquidred 'n' prism, SLX Pigeonblue 'n' are, SLT nebula 'n' white, and the Ultegra Di2 mallorcablue 'n' white from 2025. The 2026 models include C:62 ONE storm 'n' grey, C:62 EX topasblue 'n' white, C:62 Pro blackline, C:62 Pro bali 'n' prism, C:62 Race glacier 'n' black, C:62 SLX nightshift 'n' prism, C:62 SLX cosmicpurple 'n' black, C:62 SLT black 'n' black, and C:62 SLT greenfusion 'n' white. This extensive list underscores the broad impact of the manufacturing defect across their performance road bike range.

This recall highlights the critical importance of regular bicycle maintenance and adherence to manufacturer guidelines, especially when safety-related defects are identified. Cube's proactive measure to recall these bikes demonstrates a commitment to rider safety, urging all owners to participate in the recall program without delay to ensure their well-being and the integrity of their equipment.